Development of a Computer-Based Cable Sizing Software for Domestic and Industrial Applications
Authors: *Dauda, A. And Omoze, L.E.
DOI Info: http://doi.org/10.5281/zenodo.21047921
ABSTRACT
Cable sizing is rigorous, as the different parameters needed are calculated manually through several standards and technical brochures. This work involves the development of a computer-based cable-sizing software for domestic and industrial applications. The software was developed using the JAVA programming language, and it consists of four major interfaces, namely circuit data, derating factor, cable characteristics, and results. The software works with IEEE Wiring Regulation, Nexans Kabelmetal Technical Datasheet, and Prysmian Technical Manual. These provide the data required for the calculation of the derating factors and information on the cable. These calculations were then compared with the acceptable standards already linked to the software to ensure proper cable sizing. The software was used to carry out calculations for domestic wiring, low voltage, and high voltage wiring. The results obtained were then compared with the manual’s calculations to ascertain proper software operation. The software was found to be accurate, hence providing a fast and accurate means of carrying out the cable sizing, process which makes the design process easier.
Affiliations: Department of Electrical/Electronic Engineering, Faculty of Engineering, University of Benin, PMB 1154, Benin City, Nigeria.
Keywords: Cable Sizing, JAVA, Derating Factor, NetBeans IDE 8.2, Data Gathering
Published date: 2026/06/30
